Reviews
Kegco Dual Tap Stainless Kegerator Review
The Kegco 24 inch Dual Tap Stainless Kegerator (kegco-dual) is a $912.54 stainless steel, two-faucet kegerator suited to a buyer who wants the cabinet in a visible kitchen or bar space and is willing to pay a premium over painted-cabinet dual tap models for that finish.
Kegco 24 inch Dual Tap Stainless Kegerator
Kegco
Its stainless cabinet is built to sit somewhere guests will actually see it, which is the one thing a $669.90 painted dual tap cannot offer at any price.
Price last checked at publication and changes often.
What this review is and what it is not
This is not the result of personal hands-on testing. Nobody on this site owns the Kegco 24 inch Dual Tap Stainless Kegerator. What follows draws on the published manufacturer specification, the listing details for this exact model, and the pattern found across verified owner reviews, and it says so directly rather than implying a testing process that did not happen.
That means figures the listing does not publish, such as exact decibel output or interior cubic footage beyond what is stated, are not invented here. Where a buyer would want that number, this review says where to find it on the product page rather than guess at it.
A complete appliance, priced like one
At $912.54, the Kegco dual tap sits at the top of the kegerator price range in this catalog, which runs from $509.90 for a single-tap VEVOR up to this unit. That range covers a real product category: a kegerator is a refrigerated cabinet with a built-in compressor, thermostat and tower, not a tower kit meant to be added to a freezer you already own. Conversion kits that assume that existing freezer run from $105.90 to $305.00, and they are a different purchase entirely, not a cheaper version of this one.
Within the kegerator category itself, $912.54 is specifically the stainless steel premium. The VEVOR Dual Tap Kegerator (vevor-keg-dual) offers the same two-faucet, full-size keg layout at $669.90, a roughly $250 lower price, with a painted or plastic-panel cabinet in place of stainless. That gap is the entire story of this review.
Specifications worth checking
The listing specifies a full-size keg fitting and a 24 inch stainless cabinet. Confirm your keg type against that spec before buying: a 5 gallon ball lock corny keg is not the same coupler as a full-size commercial keg, and a mismatch here is the most common and most avoidable kegerator buying mistake. If your kegs are ball lock corny kegs, the VEVOR Dual Tap Kegerator for Ball Lock Kegs (vevor-keg-balllock) at $719.90 is the correctly-fitted option, not this one.
| Spec | Detail |
|---|---|
| Taps | 2, independent faucets |
| Cabinet finish | Stainless steel, 24 inch width |
| Keg fitting | Full-size |
| Price | $912.54 |
Is the stainless premium worth it
Based on what both listings publish, the difference between this unit and the VEVOR Dual Tap Kegerator is cabinet material, not cooling performance, tap count or compressor design. Stainless resists dents and scratches better than a painted panel and reads as a more finished appliance in a kitchen, a finished basement bar, or anywhere guests will see it regularly. Neither listing suggests it pours colder beer or runs a quieter compressor.
That makes the extra roughly $250 a genuinely optional cost tied to appearance and durability of the finish, not to function. A buyer putting this in an unfinished garage or a utility room where nobody but the brewer will see the cabinet is paying for a benefit they will not use, and the VEVOR at $669.90 delivers the same two-tap, full-size keg capacity for meaningfully less.
What verified owner feedback tends to raise
Owner reviews of stainless kegerators in this price range consistently note the finish holding up well against dents and fingerprints compared to painted cabinets, which matches the reason to pay the premium in the first place. Reviews also raise the same two ownership topics that come up across nearly every compressor-driven kegerator regardless of brand: how consistently the thermostat holds a set temperature over weeks of continuous use, and how audible the compressor is during its cycling.
- Neither issue appears unique to this model in the pattern of owner reports; both are standard considerations for any compressor appliance at this price tier.
- Owners who measured their keg height and cabinet interior clearance before ordering consistently report a smoother setup than those who assumed any full-size keg would fit.
What it does not automatically include
A kegerator listing covers the cabinet, compressor and tower. Whether a CO2 tank and regulator ship with this specific bundle varies, so check the current listing rather than assume either way. If gas hardware is not included, a dual gauge CO2 regulator and a 5 lb aluminum tank are sold separately and are a modest add to the total cost. Beer line and a keg cleaning kit are also typically separate purchases.
Who should buy this, and who should not
Buy this if the kegerator will live somewhere its appearance matters, a finished kitchen, a home bar area guests visit, or anywhere a scratched or dented cabinet would bother you, and if you are running two full-size kegs at once. Do not buy this if the unit is headed for a garage, an unfinished basement or a utility space where nobody will see the cabinet finish; in that setting the VEVOR Dual Tap Kegerator at $669.90 delivers the same two-tap capacity for close to $250 less, and that difference is better spent on a CO2 tank, a second keg, or a proper cleaning kit.
Placement, clearance and running noise
A 24 inch wide dual tap cabinet needs a specific footprint, and it is worth measuring the intended spot against the listed dimensions before ordering rather than assuming any dual tap unit will fit where a single tap one might have. Confirm clearance for the door or lid to open fully with a keg partway in or out, since that motion needs more room than the closed cabinet's footprint alone suggests.
Like any compressor-driven appliance, this unit will cycle on and off audibly and will release some heat into the room around it, which is simply how refrigeration compressors work rather than a flaw specific to this listing. A kitchen or finished living space will make that cycling more noticeable than a garage would, so factor the room's general quietness into the decision alongside the visual appeal that led you toward stainless in the first place.
The maintenance a stainless finish does not remove
Stainless steel protects the cabinet exterior, but it has no bearing on the beer line and faucets, which accumulate residue over time on any kegerator regardless of finish or price. A periodic cleaning pass with a dedicated line cleaning kit, such as the Bar-King Quick-Connect Beer Line Cleaning Kit (barking-clean) at $49.99, keeps pours tasting clean and protects the investment made in the cabinet itself. Treat line cleaning as a recurring cost of ownership on this unit exactly as it would be on a lower-priced painted cabinet.
Budgeting the total setup, not just the cabinet
The $912.54 price covers the refrigerated cabinet and tower only, based on what the listing itself describes. Whether a CO2 tank, regulator, kegs and beer line ship alongside it depends on the specific bundle at the time of purchase, so price those separately before assuming the cabinet price is the full cost of a working two-keg setup. A dual gauge regulator, two kegs and a length of beer line are a modest addition on top of the cabinet, and treating the full setup cost as the real number to budget against avoids an unpleasant surprise after the cabinet itself has already arrived.
The three tiers
These are three genuinely different builds, not the same product at three prices. Buy the tier that matches how much you already know you will use it.
VEVOR Single Tap Kegerator (full size)
VEVOR
One tap for $509.90 is the lowest cost true kegerator here, right for a first setup running one keg at a time rather than two.
$509.90
View on AmazonVEVOR Dual Tap Kegerator (full size, D system)
VEVOR
The same two-tap, full-size keg layout as this Kegco for $669.90, without the stainless finish. If the cabinet is going in a garage or basement, this is the more efficient buy.
$669.90
View on AmazonVEVOR Triple Tap Kegerator (ball lock)
VEVOR
A third faucet for $749.90 on ball lock fittings only makes sense once you are actually serving three distinct beers at once, closer to a small tasting setup than most home bars. Skip it if you only ever pour two kegs at a time; a third tap you do not use is wasted cabinet space.
$749.90
View on AmazonEverything else worth considering
VEVOR Single Tap Commercial Draft Dispenser
Full size single tap kegerator for D system commercial kegs.
IDEALHOUSE Commercial Draft Beer Kegerator
Full size keg refrigerator for D system kegs.
Kegco Full Size Single Faucet Kegerator
Stainless full size single faucet keg refrigerator for D system kegs.
VEVOR Dual Tap Kegerator for Ball Lock Kegs
Dual tap kegerator plumbed for ball lock corny kegs, which is what homebrewers actually fill.
Kegco Standard Tower Conversion Kit with 5 lb CO2 Tank
A CONVERSION kit, not a kegerator: tower, lines, regulator and a CO2 tank to fit a fridge you already own.
Before you do this
A CO2 cylinder is a high pressure vessel regardless of which kegerator it feeds. Secure it upright so it cannot tip, never attempt to modify the valve or regulator, and have it filled only by a qualified gas supplier.
Related on BrewGearCalc
- Best kegerators for home brewing
- Kegerator vs conversion kit
- Best CO2 regulators and tanks
- Best corny kegs
- Keg carbonation reference
Frequently asked questions
- Is the Kegco dual tap kegerator worth the extra cost over a VEVOR dual tap?
- Based on published specifications, the roughly $250 difference between this $912.54 Kegco and the $669.90 VEVOR Dual Tap Kegerator is a stainless cabinet finish, not a difference in cooling performance or compressor design. It is worth paying if the cabinet will be visible in a kitchen or bar area where dent resistance and appearance matter. It is not worth paying for a garage or utility room kegerator nobody else will see.
- What keg type does the Kegco 24 inch Dual Tap Kegerator use?
- The listing specifies a full-size keg fitting, not 5 gallon ball lock corny kegs. If your kegs use ball lock posts, look at a corny-keg specific model such as the VEVOR Dual Tap Kegerator for Ball Lock Kegs at $719.90 instead. Confirming keg fitting against the exact listing before ordering avoids the most common and most avoidable kegerator buying mistake.
- Does the Kegco dual tap kegerator include a CO2 tank and regulator?
- That depends on the specific bundle, so check the current product listing rather than assume either way. If gas hardware is not bundled in, a dual gauge CO2 regulator and a 5 lb aluminum CO2 tank are sold separately and typically add a modest amount to the total setup cost. Confirm the tank and regulator share a matching CGA fitting before ordering both.
- How much floor space does a dual tap kegerator need?
- A dual tap cabinet needs room for two keg wells side by side plus clearance for the compressor housing at the back, and it needs more width than a single tap unit. Measure your intended spot, including room to fully open the door or lid with a keg partway in or out, against the dimensions on the current listing before ordering, since footprint varies between kegerator models even at similar tap counts.
- Does a stainless kegerator cool beer better than a painted one?
- No, based on what these listings publish. Stainless steel is a cabinet finish that resists dents and fingerprints better than a painted panel; it does not change the compressor, the thermostat, or how cold the interior gets. A painted-cabinet kegerator at a lower price will hold the same serving temperature as a stainless one with the same internal components.
Researched from published brewing formulas, manufacturer specifications and verified owner reviews. This is general guidance, not professional advice.